NEWS CENTER
全自動pcb分板機在電子行業中應用廣泛，從led到手機的pcb板，都會用到走刀分板機、曲線分板機或者鍘刀分板機等等，而分板機的使用有一定的操作要求，這樣既能快速提高切割速度，更能避免因操作失誤而導致設備損壞，甚至人員傷害;除此之外，我們還要對設備進行日常的保養，使得設備能正常、高效的工作。那么，如何對分板機進行保養呢？
1，日常使用，在工作完成后，必須關掉電源。
2，在全自動PCB分板機使用時，要定期對設備進行清潔保養，具體操作方法用適當?shù)臑⒕M(jìn)行清潔各個部份，和它吸塵內的塵埃稀釋干凈，確保它的干凈的使用。
3，全自動PCB分板機的銑刀如果在使用的時候出現異常的振動或是響聲，需要停下對它進行檢查，在檢查的時候，要確保電源是關閉的狀態在進行檢查。
4，在清潔保養時，要注意避免酒精臟物等掉入主軸，以免影響它正常工作。
5，全自動PCB分板機滑桿和軸承的保養，需要在平時適當時間增加潤滑油來保養，同時對于松動的零件需要固緊。
6，如果發現刀具損壞要及時更換，然后加入潤滑油。潤滑劑是減少摩擦的作用，減少設備磨損。
Fully automatic machine widely used in the electronics industry, PCB points from the led to the mobile phone PCB, can use the feeding machine, curve points machine or pole plate, etc., and points the use of the machine operation requirements to a certain extent, such already can rapidly improve the cutting speed, can avoid the equipment damage caused by the error, and even injuries; In addition, we also need to carry out daily maintenance of the equipment, so that the equipment can work normally and efficiently. So, how to maintain the plate machine?
1. For daily use, the power must be turned off after the work is finished.
2. When the automatic PCB board splitter is used, it is necessary to clean and maintain the equipment regularly. The specific operation method is to clean each part with appropriate sprinkling essence and dilute the dust in its vacuuming to ensure its clean use.
3, automatic PCB splitter milling cutter if abnormal vibration or sound in use, need to stop to check it, when checking, to ensure that the power is off in the state of check.
4, in cleaning and maintenance, we should pay attention to avoid alcohol dirt and other things falling into the spindle, so as not to affect its normal work.
5, the maintenance of the slide rod and bearing of the automatic PCB board distributor needs to increase lubricating oil at the appropriate time at ordinary times to maintain, and the loose parts need to be fixed.
6, if the tool is found damaged to be replaced in time, and then add lubricating oil. Lubricants are used to reduce friction and equipment wear.